Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Wheels Manufacturing Inc. Derailleur Hanger 22
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x10 Flat Head Screw Note: This hanger has a pin machined in to it that inserts in to the frame (refer to photos).
Wheels Manufacturing Inc. Derailleur Hanger 269
$34.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M3x8 Flat head screws included - Cannondale Hanger #KP284
Wheels Manufacturing Inc. Derailleur Hanger 3
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x10 Flat Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 42
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 85
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. PF30 Adapter for Campagnolo Cranks
$50.00
The Wheels Manufacturing PressFit 30 Bottom Bracket Adapter for Campagnolo Ultra-Torque Cranks adapts Campagnolo Ultra-Torque cranks to PF30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr NOote: - PF30-CAMP was originally designed for use with SRAM PF30 bottom brackets with 6806 bearings installed. They will not work with newer SRAM PF30 bottom brackets that use a plastic insert that fits into the bearings and covers the outside of the bearings. - Will not work with Wheels Manufacturing PF30 Bottom Brackets.
Wheels Manufacturing Inc. PF30 Outboard Angular Contact Bottom Bracket
$99.00 - $119.99
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 158g
Wheels Manufacturing Inc. Pedal Washers
$10.00
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
WTB Deva
$39.95 - $129.95
Among the most loved saddles in WTB history, the Deva is back, in all its previous glory, with updated graphics to match its diverse usage. Same high-performance shape, same amount of generous padding, same short nose for easy on-off transitions, same strategically placed gel inserts on the ProGel model. Designed to suit the female form, without the presence of flowers or pink butterflies. So incredibly comfortable that even the manliest men are able to look past the women’s-specific label.
WTB Rocket Cromoly Saddle
$79.99
The Rocket is an incredibly versatile saddle. From a two minute hair-raising downhill to a 2700-mile individual time trial, this saddle is the top choice for those pushing the sport. - Narrow nose and midsection means no chafing during long pedaling sessions - Thick padding and a swooped tail allow riders to lock in their ideal position for power and comfort - Cromoly rails
WTB Silverado Cromoly Saddle
$79.99
The Silverado is one of WTB’s most iconic and revered saddle shapes. Lightweight and slim, the design oozes speed while proving to be incredibly comfortable. Ride a Silverado and you’ll quickly know what everyone’s raving about. - Long, tapered nose and flatter platform provide ample real estate for shifting positions - Optimized padding-to-weight ratio make the Silverado a hit across all disciplines, including road - Cromoly rails
WTB Volt Cromoly Saddle
$79.99
The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Cromoly rails
Vision Armrest Pads
$22.99
- Deluxe molded replacement pads fit all armrest Vision aero bars - Molded replacement pads fit the Vision Mini TT clip-ons - Dual density foam for maximum comfort - Non-slip textured top
VP Components VP-001 Flat Pedals
$84.99
VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability.
TruVativ Giga Pipe Team SL Bottom Bracket
$49.99
Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.
TruVativ Hussefelt Comp Riserbar
$29.99
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ Pedal Washer
$3.99
- Protects cranks from damage caused by overtightening pedals
TruVativ Steel Chainring Bolt Set
$9.99
- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex
Trek Kids' - Dialed Grips
$6.99
Your kid will be the talk of the block with a new pair of Trek's Dialed Kids' grips. They come in a rainbow of colors to brighten up those handlebars and maximize the fun!
Thomson Elite Covert Dropper Seatpost
$479.99
Keep the flow going with Thomson's Elite Covert Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and its cable attaches to the very bottom and uses your bike's internal cable routing to keep your frame nice and clean. Of course, the Elite features Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
Terry Butterfly Ti Gel +
$179.99
The Butterfly Ti Gel + has a wide relief channel combined with a contoured rear and a thin gel layer, making it extremely comfortable for endurance riders. It is wider in the rear than typical race saddles for good support of a woman's sit bones and has a remolded cutaway through the nose and mid-section for flexibility and comfort against soft tissues. The flat top with multi-density injection molded foam is a bit stiffer in the rear for more power while pedaling. - Low profile - Super-strong Ti-316 rails - Length x width: 262mm x 155mm - Weight: 255 g / 9.0 oz.
Terry Butterfly Ti Saddle
$164.99
The ultimate bike seat for women, ridden and universally loved around the world. For two decades, Terry has been designing and testing saddles with female athletes, distance riders, and recreational cyclists. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. It's wider in the rear than typical race saddles for good support of a woman's sit bones and completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues. It features a low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling, Ti-Nox rails that are super light and super strong, and textured leather that wears beautifully over time while keeping you in position. - Length x width: 262mm x 155mm - Weight: 248 g / 8.7 oz.
Terry Terry Fly Ti Men's Saddle Black
$164.99
Terry Precision Fly Ti Men's saddles feature a center cutaway to reduce pressure.
TRP CX-8.4 Brake Set
$149.99
Looking for a great brake upgrade for your SRAM or Campagnolo-equipped cyclocross bike? TRP's CX-8.4 linear-pulls are the answer. The 84mm-tall CNC'd-aluminum arms work seamlessly with SRAM and Campy levers, and they deliver outstanding stopping power and speed control while providing ample mud clearance. Plus, the integrated barrel adjuster on the noodle makes those on-the-fly adjustments simple. Feathery titanium hardware keeps weight down, and you'll love the brake-pad holders that make toeing-in and replacing the pads a breeze.
SwissStop Disc 30 Organic
$29.99
High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Magura - MT 2,4,6,8 Campagnolo - Road Disc
SwissStop Disc 34 EXOTherm2
$45.99
Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Shimano: - Dura Ace BR-R9170 - Ultegra BR-R8070 - BR-RS805 - BR-RS505 - BR-RS405 - BR-RS305
SwissStop Flash EVO Black Prince
$54.99
Characteristics: Excellent modulation, cooler temperatures and great wet weather brake performance. The Black Prince brings the feel of braking on alloy wheels to carbon wheels. Design: - low profile shape - each Flash EVO pad is 0.75mm narrower then a FlashPro pad for a total of 1.5mm more clearance for wide rims - 4 asymmetric cut outs - direct mount caliper compatible Fits: - SRAM Road - Shimano Road - CAMPA Potenza 2016 - CAMPA Athena 2016 - CAMPA Veloce 2016
SwissStop RacePro Yellow King
$61.99
High performance compound for carbon wheels. Excellent stopping power wet and dry with superior modulation and low pad wear rates. Fits: - Campagnolo 10|11|12 speed DOES NOT FIT - Campagnolo Potenza 2016 - Campagnolo Athena 2016 - Campagnolo Veloce 2016 - Campagnolo Centaur 2017
Surly Constrictor Seatpost Clamp
$15.00
If you're suffering from a slipping seatpost, Surly has the remedy. The Constrictor Seatpost Clamp grabs your post tight and hangs on for dear life. It's machined from anodized aluminum billet, uses an 8mm bolt for ultimate strength, and can accommodate a rear cantilever brake hanger.
Surly Cross-Check Fork
$125.00
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm - Tire Clearance: 700c x 45mm - Weight: 2.3 lb (1.0kg) uncut